here are how to use Infinity USB?

Step 1

Make sure your PS3 is in V3.55 system, either OFW (official firmware) or CFW (official firmware). Which means if your PS3 is lower than V3.55, just update it to V3.55! If your PS3 is higher than V3.55, sorry, you can not use this item. please use E3 flasher to downgrade your PS3 to V3.55 first.

Step 2

When your PS3 is in V3.55, you need to install the PS3 INFINITY V3.55 CFW V2. Here is the method on how to install PS3 INFINITY USB CFWandMULTIMAN.The update method is just the same as update the official firmware via USB storage.

Prepare Custom Firmware V2

1. Download the INFINITY USB 3.55 Dongle Custom Firmware V2on Web page.
2. Extract the file, you will get “INFINIT-3.55-CFW-V2.0.zip” folder, you can see “PS3UPDAT.PUP” inside.
3. Prepare a USB storage (300MB free space request), create a folder named “PS3″in the root of your USB storage, then create another folder named “UPDATE” under the “PS3″ folder, put “PS3UPDAT.PUP” into “\PS3\UPDATE\” folder.
4. Double comfirm under \PS3\UPDATE\ folder in contant PS3UPDAT.PUP files.

Prepare MULTIMAN

1. Download the multiMAN ver 02.09.00 BASE (20111006-205000).zipon Web page.
2. Extract the file “multiMAN ver 02.09.00 BASE (20111006-205000).zip”, you can see “multiMAN ver 02.09.00 BASE (20111006-205000).pkg” inside.
3. Put “multiMAN ver 02.09.00 BASE (20111006-205000).pkg” into mass storage root folder “\”.

Custom Firmware Install

1. Plug your USB storage into your PS3 USB Slot 1 and power on your PS3.
2. Select the system update option on Settings icon and choose update via USB storage.
3. Choose the PS3UPDAT.PUP and start updating. Wait until finish updating. (Don′t power off during the system update progress)
4. After Install complete, PS3 will display icon screen again. The INFINIT-3.55-CFW-V2.0 firmware store in PS3 now.
5. Power Off the PS3 and Plug the INFINITY USB Dongle onSlot 1 and Plug the mass storage on Slot 2.
6. Power On again, INFINITY USB Dongle LED will flash. After PS3 menu display. You can see two folder on Game Icon: * Install Package and */app_home/PS3_GAME/

MULTIMAN Install

1. Select the * install Package Files on Game icon and choose multiMAN via USB storage.
2. Choose the multiMAN ver 02.09.00 BASE (20111006-205000).pkg and start install. (Don′t power off during the install in progress)
3. After Installation, you will see MULTiMAN icon near to folder */app_home/PS3_GAME/

Step 3

After this step, you have installed the INFINITY USB. Let′s go and start playing a game. i will take “FEAR 3″ as an example.

Notice: You need to replace the PS3 patched eboot for the V3.60+ games before you play the games.

It means you need to download the both FEAR 3 game file and also F.E.A.R.3_EBOOT_PATCH_TB_ PS3-PARADOX if you dont do this step,the screen will freeze and changeblack. ok i have downloaded those files and also have patched it, let′s go.

1. Before you power on the PS3, just insert the INFINITY USB on slot 1 and the your game HDD / mass storage on slot 2.
2. Config “Disc Auto-Start Off” on System Setting.
3. Insert official PS3 game (blue disc) on PS3. (Any official game)
4. Start Multiman and choosegame “FEAR3” on game List browser.
5. Press X to load the game, and than goto PS3 menu again
6. On PS3 menu you can see blue disc icon and it’s label is “FEAR3.”
7. Select disc icon Press X.

Done, congratulations!

** Slot 1 USB on Left side of PS3 , Slot 2 USB on right side.

Read more: http://www.ps3news.com/ps3-hacks-jailbreak/ps3-infinity-usb-tb-jb2-dongle-clone-surfaces-from-matrix-team/#ixzz20CYGC6go

Download: Infinity USB 3.55 Dongle Custom Firmware V2 / Infinity USB V3.6C Dongle Firmware Update / Infinity USB PC Tools / MultiMAN v02.09.00 Base (20111006-205000)

• No need to open your console, just plug and play.
• Booting of games designed for PS3 system software v3.6 and above
• Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers
• Does not require the power/eject trick
• Custom v3.55 Dongle firmware behaves like OFW when INFINITY USB is not inserted

• Further features to be added as they are developed
• On board 4 MBytes SPI flash
• Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools )

• Enjoy PS3 games with files on external USB HDD (FAT32)

• Supports all regions of consoles
• Supports all regions of v3.6+ games
• Report Features for improve INFINITY USB compatibilty.
• MCU firmware and flash firmware updatable using easy through PC update software.
• Smart button for plug and play using PC.infinity usb official site:http://www.jb-infinity.com/

The x360 Glitchip comes after the hack made by Gligli (The Reset Glitch Hack), which allows the boot of unsigned code on the XboX 360 no matter the kernel installed, and on all revisions of the motherboard currently on the market Slim also. (Except Xenon Motherboard).

To explain it (very) simply, the chip sends little pulses to the processor in order to distabilize the console and make it believe a modified CB is correctly hashed and signed. This operation doesn’t succeed every time, but it is repeated till it works. Once the modified/hacked CB is validated by the console, it has enough rights to launch unsigned code and in our case, XeLL, the Xenon Linux Loader.

• Boot of unsigned code on Xbox 360
• Only one chip for both xbox. Compatible for Xbox 360 PHAT and SLIM
• No additionnal component needed. (Except a JTAG Cable, if the chip is shipped to you empty)
• Compatible no matter the kernel installed on your Xbox 360
• Very easy installation (7 Wires on Slim, 6 Wires on Phat)
• Easy Firmware update, via JTAG wire (not included)
• Adapted size for easier installation on Xbox 360 (3cm by 4cm)
• The xbox 360 Will boot unsigned code in a 10s to 2~3min laps time.
• The x360Glitchip brings JTAG equivalent
• All XboX 360 FAT are compatible except Xenon, Falcon with CB 5772+, Jasper with CB 6752+. (A full software fix is on the way for these specific CB)
• All XboX 360 Slim are compatible except the one manufactured since August 2011. (Hana chip is missing. A possible hardware fix would be developped)

r4i sdhc kernel 1.57 download
R4i V1.57b Update:

1. Upgrade support N3DS V4.1.0-8 and NDSI 1.44 (for 3DS card and NDSI card).

2. Solved games:

6015 – Detective Conan: Kakokara no Zensou Kyoku (JP)

5976 – Captain Morgane and the Golden Turtle (EU)

5919 – The Smurfs (EU)

5905 – Women’s Murder Club: Games of Passion (US)

5770 – Harry Potter and The Deathly Hallows: Part 2 (US)

5758 – Kaidan Restaurant: Zoku! Shin Menu 100-Sen (JP)

5586 – Pokemon Version Blanche (FR)

5568 – Casual Classics (EU)

5467 – Naruto Shippuden – Naruto vs Sasuke (KR)

5282 – Super-Scribblenauts (EU)

5213 – Last Window: The Secret of Cape West (EU)

4975 – Kunio-Kun no Chou Nekketsu! Soccer League Plus World Hyper Cup Hen (JP)

1503 – Help! Rhythm Hero(KR)

1287 – Elite Beat Agents(DE)

1229 – Elite Beat Agents(ES)

1219 – Elite Beat Agents(IT)

• Change Log (WOODR4 V1.48)
  - ‘moyeora! kirby (korea)’ fixed.
  - ‘detective conan – kakokara no zensou kyoku (japan)’ fixed.
  - ‘super scribblenauts (europe) (en,sv,no,da,fi)’ fixed.
• wood r4 1.48 download
• Buy wood r4i gold

wood R4 is the most famous alternative to the original R4 menu. It brings tons of new exclusive features, perfects ROM compatibility and support along its numerous updates, it is by far the best system for your flashcart.

HOW TO USE PB2 FOR PS3 ?

PB2 downloads:

PB2 “3.55-Dongle” Custom Firmware v2

PB2 User Guide

Setting up your PS3
Before you may use PB2, you must first install the 3.55‐Dongle custom firmware onto your PS3. This is similar in function to the well known kmeaw CFW; however it also includes modifications which allow PB2 to operate correctly. The 3.55‐Dongle firmware updater is distributed in a file labelled “PB2‐3.55‐CFW.zip” which can be download from download pages of our website. Proceed with the update as follows:
1. Obtain a USB storage device such as a USB HDD or USB flash memory stick
2. Create a folder on the storage device in which to save the update file. Using a PC, create a
folder named “PS3” on the storage device. Within the PS3 folder, create a folder named
“UPDATE”
3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have
this path structure on your USB storage device: PS3UPDATEPS3UPDAT.PUP
4. Boot your PS3 and insert the USB storage device into the PS3
5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media)
6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the onscreen instructions to complete the update
7. After the update has completed, your PS3 will restart and you now be running the 3.55‐
Dongle custom firmware. You may now enjoy the use of the PB2 dongle
(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)

Using PB2
To use PB2, simply insert the dongle into one of the USB ports on your PS3 and power the system up. Do not remove the dongle at any point while the PS3 is running.
PB2 for the most part functions just like a regular jailbreak/CFW in that you may install and run any homebrew software and all of the standard backup managers are supported. The most notable difference is that games designed for PS3 system software v3.6 and above are also supported. However, in order to enjoy such titles, you must first obtain special “PB2 versions” which have been modified to function with PB2. Such modified versions are available for download through the “Game Patches” and are clearly labelled as being PB2 compatible. Once you have obtained PB2 modified games, simply copy them to your PS3 internal or external USB HDD as you would with any usual jailbreak game and launch in the usual manner through any one of the many available backup managers.

Updating PB2
From time to time, we will release firmware updates for PB2 which will add new features. Directions and a list of changes will be provided inside the firmware update archive file.

ps3 pb2 uk related products:

500GB PS3 Game SAMSUNG HDD with 51 PS3 Games

E3 Flasher buy

True Blue PS3 JB2

1.5TB ps3 Games hdd

PS3 Break v1.2

PS3 USERCHEAT

PS3 JB-King

pb2 review:

PB2 dongle for PS3 can break your own PS3 console and enjoy the latest and most popular PS3 games which require 3.6+ or 3.7+ PS3 firmware. The PS3Break team are focused on enhancing the user experience of our customers, play games with it easily!

PB2 Features Include:

• Booting of games designed for PS3 system software v3.6 and above
• Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers
• Does not require the power/eject trick
• Custom v3.55 Dongle firmware behaves like OFW when PB2 is not inserted
• Manufactured from highest grade components and Actel based
• Durable and high quality plastic case design
• Tough and durable plastic packaging
• Further features to be added as they are developed
• On board 2 MBytes SPI flash
• Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, PB2 cannot downgrade a console)
• Supports all regions of consoles
• Supports all regions of v3.6+ games
• Rock solid crystal oscillator on board for flawless timings

PB2 Games 3.5″ HDD Function Features:

1. Choose as you like (500G / 1T) hdd.
2. You can choose directly from our game directory, only no more than the HDD capacity. Our distributor is offering one-to-one pre-sale and after-sale service.
3. The Hard Disks which load the games are provided by PB2 team, no need to replace with any eboot files. Easy to use and instantly fun.

PB2 Games 2.5″ HDD Function Features:

1. Choose as you like (500G / 1T) hdd.
2. You can choose directly from our game directory, only no more than the HDD capacity. Our distributor is offering one-to-one pre-sale and after-sale service.
3. The Hard Disks which load the games are provided by PB2 team, no need to replace with any eboot files. Easy to use and instantly fun.

PB2 FAQ:

Q: How do I use PB2 to play a purchased PS3 game that requires 3.6+ PS3 firmware?

A: PB2 does not support directly playing original game discs requiring 3.6+ on lower firmware versions. In order to play such recent games on your jailbroken 3.55 CFW PS3 you must first dump your original game disc to HDD using one of the many supported PS3 backup managers such as Multiman.

Once you have dumped the game, you must obtain and install a ” PB2 patch” corresponding to said game from our website. This procedure effectively creates a copy of your game on a HDD, modified to function on your 3.55 CFW PS3 in conjunction with PB2. For full details, please refer to the PB2 Users Guide on the download page.

Q: Where can I obtain PB2 patch files?

A: We host PB2 patch files on the Game Patches page of our Web site (ps3break.com/Patches.asp), no need to google these patch files by youself.

Q: What are the requirements for using PB2?

A: In order to use PB2, you MUST have a PS3 running firmware v3.55 or lower. If your PS3 is running a firmware version higher than 3.55 then you must first downgrade your PS3 via other means (such as hardware downgrade, please refer elsewhere for further information).

Q: What is the general procedure for getting 3.6+ games running on a 3.55 CFW PS3 with PB2?

A: The procedure is as follows:

1) Download and install the PB2 3.55 CFW (custom firmware) on your PS3. The PB2 CFW is required in order to allow the PB2 dongle to function with your PS3
2) Obtain dumps of your 3.6+ PS3 games using PS3 backup managers or other methods
3) Obtain PB2 game patches corresponding to the game dumps you have, and install these patches over the top of your game dumps. The patched game dumps should be stored either on your PS3′s internal HDD or an external USB HDD
4) Insert the PB2 dongle into your PS3 and turn on the console. Once the PS3 has finished booting, you may then launch your favourite backup manager (such as Multiman) and from there select your PB2 patched games

Q: There is no PB2 patch available for my favourite game XYZ, can I still play it with PB2?

A: Unfortunately, you will need to wait until a PB2 patch is available. The PB2 team monitors various Web forums, so if there is a title you want to play then make a post on a PS3 related forum requesting the game or email us with your request. We will most likely see your post or email and do our best to release a patch as soon as possible.

ps3 pb2 related products:

500GB PS3 Game SAMSUNG HDD with 51 PS3 Games

E3 nor Flasher

JB2 USB Dongle JB2 (Jailbreak 2) True Blue PS3 JB2 dongle

1.5TB 3.5″ HDD External Enclosure+158 latest ps3 Games

PS3 Break v1.2

PS3USERCHEAT(CHT dongle)

PS3 JB-King Dongle

1: New mainboard Fast dual boot successfully with E3 FLASHER. Click here to download manual.

2: E3 flasher Fast dual boot and downgrade OFW4.11 to 3.55 successfully, it’s same way as downgrade 3.73 to 3.55.
We suggest user upgrade to OFW4.11 and then downgrade to 3.55 from now on. And don’t forget backup your OFW4.11 bios well .

3: Downgrade to OFW3.41 from CFW3.55CHECKOFF successfully, tested by E3TEAM.
Now you can enjoy any 3.55FW by this way (downgrade to OFW3.41 and then upgrade to 3.55, include JB2CFW3.55, OFW3.55 and others).  E3 FLASHER MANUAL DOWNLOAD

v1.2 is out, and adds SCE info with a hexdump option to dump the decrypted PS3 Core_OS so PS3 developers can examine it.

CHANGES

BUG FIXES

FEATURES:

HOW TO USE:

NOTES:

Download

Earlier this week,ps3 True Blue v2.6 was released, but due to problems with ‘third-party’ homebrew it was pulled, instead v2.61 has now been officially released on their site.

Remember you will need to upgrade your TB dongle for some of the newer games being released over the next few months, and if you have any freezing issues on start-up with our PS3 it is recommended to remove all ‘third-party’ programs like ‘reACTPSN’, ‘Spoofers’, etc. and restore to original TB CFW v2, then testing your PS3 unit out fully before attempting to re-install programs like ‘reACTPSN’.